@westh/umxxc-parser
Parse messages from UMxxC devices, that is for instance the UM24C, UM25C, or the UM34C.
This parser is a derivative of these guys' work:
Whereas the above repos provide a complete 'suite' for getting and parsing the data from a UMxxC device this is merely the parser.
Installation
npm install @westh/umxxc-parser
Usage
const umxxcParser = require('@westh/umxxc-parser')
const messageToBeParsed = Buffer.from('...') // ...however you get your data from the UMxxC device
const parsedMessage = umxxcParser.parse(messageToBeParsed)The parsedMessage will contain something that looks like the following:
{
model: 'UM34C',
voltage: 4.84, // [V] for UM25C this value will be decivolts
current: 25, // [mA] for UM25C this value will be tenth-milliamps
power: 121, // [mW]
temperature: {
celsius: 23,
fahrenheit: 74
},
selectedGroup: 0,
groups: [
{ accumulatedCurrent: 2, accumulatedPower: 10 }, // [mAh] [mWh]
{ accumulatedCurrent: 0, accumulatedPower: 0 },
{ accumulatedCurrent: 0, accumulatedPower: 0 },
{ accumulatedCurrent: 0, accumulatedPower: 0 },
{ accumulatedCurrent: 0, accumulatedPower: 0 },
{ accumulatedCurrent: 0, accumulatedPower: 0 },
{ accumulatedCurrent: 0, accumulatedPower: 0 },
{ accumulatedCurrent: 0, accumulatedPower: 0 },
{ accumulatedCurrent: 0, accumulatedPower: 0 },
{ accumulatedCurrent: 0, accumulatedPower: 0 }
],
usbDataPlus: 0.04, // [V]
usbDataMinus: 0.03, // [V]
chargingMode: 7,
accumulatedCurrent: 2, // [mAh]
accumulatedPower: 10, // [mWh]
thresholdCurrent: 0, // [A] and is the threshold at which accumulated... is captured
accumulatedTime: 390, // [s]
connected: 1,
screenTimeout: 1,
screenBrightness: 3,
resistance: 193.6, // [Ω]
screenMode: 2,
unknown: <Buffer 15 d4>
}Description
Basically the parser does what is described below to whatever Buffer you might throw at it. The calculations mentioned in the 'Meaning' column are taken care of, except for the edge cases for the UM25C which are not handled at the moment.
| Offset | Length | Type | Meaning |
|---|---|---|---|
| 0 | 2 | model | Model ID |
| 2 | 2 | measurement | Voltage - UM25C: millivolts (divide by 1000 to get V), UM24C/UM34C: centivolts (divide by 100 to get V) |
| 4 | 2 | measurement | Amperage - UM25C tenth-milliamps (divide by 10000 to get A), UM24C/UM34C: milliamps (divide by 1000 to get A) |
| 6 | 4 | measurement | Wattage (in mW, divide by 1000 to get W) |
| 10 | 2 | measurement | Temperature (in Celsius) |
| 12 | 2 | measurement | Temperature (in Fahrenheit) |
| 14 | 2 | configuration | Currently selected data group, zero-indexed |
| 16 | 80 | measurement | Array of 10 main capacity data groups (where the first one, group 0, is the ephemeral one) -- for each data group: 4 bytes mAh, 4 bytes mWh |
| 96 | 2 | measurement | USB data line voltage (positive) in centivolts (divide by 100 to get V) |
| 98 | 2 | measurement | USB data line voltage (negative) in centivolts (divide by 100 to get V) |
| 100 | 2 | measurement | Charging mode index |
| 102 | 4 | measurement | mAh from threshold-based recording |
| 106 | 4 | measurement | mWh from threshold-based recording |
| 110 | 2 | configuration | Currently configured threshold for recording (in centiamps, divide by 100 to get A) |
| 112 | 4 | measurement | Duration of threshold recording, in cumulative seconds |
| 116 | 2 | configuration | Threshold recording active (1 if recording, 0 if not) |
| 118 | 2 | configuration | Current screen timeout setting, in minutes (0-9, 0 is no screen timeout) |
| 120 | 2 | configuration | Current backlight setting (0-5, 0 is dim, 5 is full brightness) |
| 122 | 4 | measurement | Resistance in deci-ohms (divide by 10 to get ohms) |
| 126 | 2 | configuration | Current screen (zero-indexed, same order as on device) |
| 128 | 1 | unknown | |
| 129 | 1 | checksum/unknown | Checksum (UM34C) or unknown |
Source RDTech UM series by sigrok.
Testing
Running yarn test will first run yarn build and then test both the CommonJS and ESM version.
License
GPL-3.0