cellocator-parser
Parse raw data from cellocator devices
Installation
npm i -S cellocator-parser
Use
const cellocator = ; const raw = '4d43475000bdda0b0000060ddf20041017002000e3c40000baeff3c6b6224502000000000000ea65000402090daec5f7cb302cff3357000038090000930a002a170c03e007c1' 'hex';const data = cellocator;/*{ raw: '4d43475000bdda0b0000060ddf20041017002000e3c40000baeff3c6b6224502000000000000ea65000402090daec5f7cb302cff3357000038090000930a002a170c03e007c1', unitId: 776893, imei: 0, manufacturer: 'cellocator', device: 'CelloTrack', alarm: {type: 'ConnectionUp'}, type: 'data', loc: { type: 'Point', coordinates: [ -79.09097658351084, -7.953307941260071 ] }, speed: 84.96, datetime: '2016-03-12T23:42:00.000Z', gpsTime: '2016-07-12T23:42:00.000Z', direction: 155.09967514191385, satellites: 9, voltage: { ada: 28.1176470588165, adb: 4.00235293989, adc: 45.41720000000001, add: 182 }, altitude: 223.23000000000002, status: { sos: false, input: { '1': false, '2': false, '3': false, '4': false, '5': true }, output: { '1': false, '2': false, '3': false, '4': false, '5': false, '6': false }, charge: false, engine: false, driving: false, accelerometer: true, gpsPower: false }, communication: { noHibernation: false, momentarySpeed: false, privateMode: false, firmwareSubversion: '0011', canOriginatedOdometer: false, canOriginatedSpeed: false, dataType33_38: '0', messageSource: '0', garminConnected: false, garminEnable: false, messageInitiative: false }, locationStatus: { GNSSAntennaSelected: 'internal', trailer: false, CFEType: 'Not Applicable' }, hardware: { id: 31, model: 'Cello-IQ', modem: 'Telit GE864, automative' }, software: 32, protocol: 4, transmissionReason: 32, transmissionReasonSpecificData: 0, odometer: 148770, gpsModes: { '1': { pMode: '>3 satellite solution', tpMode: 'Full power position', altMode: 'No altitude hold', dopMask: 'DOP mask not exceeded', dgps: 'No DGPS position' }, '2': 'Validated' }, plmn: 71610, serialId: 13, messageType: 0, valid: true}*/ const data = unitId: 836522 commandNumerator: 1 instruction: '1_on' // enable output 1 => port + _ + on/off;const command = cellocator;// new Buffer('4d43475000aac30c0001000000000003000300140014000000000000a8', 'hex')