This is a Hubot script package that will control your Philips Hue lights.

• A Local Hubot Installation
• Philips Hue Lightbulb system
• I'm using campfire to interact with my system. Other adapters should work as well.

Uses the node-hue-api NPM package to communicate with the hue bridge.

Run the following command to make sure the module is installed to your local Hubot instance.

$ npm install hubot-philipshue --save

To enable the script, add the hubot-philipshue entry to the external-scripts.json file (you may need to create this file).

["hubot-philipshue"]

export PHILIPS_HUE_HASH="YourSecretHash"
export PHILIPS_HUE_IP="xxx.xxx.xxx.xxx"

There is a two-step process to generating the credentials above.

First, press the button on your Hue Hub. This puts the device in a mode to accept new connections.

Second, make an HTTP POST request of the JSON payload below to http://YourHueHub/api. You can use the Clip API Debugger on your base station as well.

$ curl -v -H "Content-Type: application/json" -X POST 'http://YourHueHub/api' -d '{"devicetype": "YourAppName"}'

The Hub will respond with:

{"success":{"username":"YourSecretHash"}}

The username property will contain the hash key to use in the PHIPLIPS_HUE_HASH environment variable.

If you have not pressed the button on the Hue Hub you will receive an error like this:

{"error":{"type":101,"address":"/","description":"link button not pressed"}}

Press the link button on the hub and try again.

• hubot hue lights - list all lights
• hubot hue light {light number} - shows light status
• hubot hue hsb light {light number} {hue} {saturation} {brightness}
  • hue range: 0-6553
  • saturation range: 0-254
  • brightness range: 0-254
• hubot hue xy light {light number} {x} {y}
  • x-y values are in the CIE Color Space
  • valid x: 0.0-1.0
  • valid y: 0.0-1.0
• hubot hue ct light {light number} {color temp}
  • color temperature values use Mired color temperature
  • color temperature range: 153-500 (153 appears 6500K, 500 appears 2000K)
• hubot hue turn light {light number} {on|off} - flips the switch
• hubot hue groups - lists the groups of lights
• hubot hue config - reads bridge config
• hubot hue {alert|alerts} light {light number} - blink once or blink for 10 seconds specific light
• hubot hue {colors|colorloop|loop} {on|off} light {light number} - enable or disable the colorloop effect
• hubot hue group {group name}=[{comma separated list of light indexes}]
• hubot hue rm group {group name} - remove grouping of lights named
• hubot hue @ <on|off> - turn all lights in on or off
• hubot hue @{group name} hsb=({hue},{sat},{bri}) - set hsb value for all lights in group
• hubot hue @{group name} xy=({x},{y}) - set x, y value for all lights in group
• hubot hue @{group name} ct={color temp} - set color temp for all lights in group

kingbin

stephenyeargin

bschlief