node-rcswitch-he
Node bindings for the rcswitch RaspberryPi port.
Requirements
- Like the C++ version of rcswitch, WiringPi must be installed in order to compile.
- Both the data and the power Pins of the 315/433Mhz emitter must be connected to the RPi. Note the number of the WiringPi data Pin. (see http://wiringpi.com/pins/)
- The node command must be run with root access
Usage
var rcswitchhe = ; // Might throw an error if wiring pi init failed (no root) rcswitchhe; // Use data Pin 0rcswitchhe; // Switch on the first unit of 12345678 grouprcswitchhe; // Switch off the second unit of 12345678 group
API
Configuration
pin
)
rcswitchhe.enableTransmit(Enable transmission on the given pin (make it an OUTPUT). Must be called before any other functions.
pin
- (Number) data Pin to use following the WiringPi schema
Return true if pin
is an integer, false otherwise.
remoteCode
)
rcswitchhe.setRemoteCode(remoteCode
- (Number) remote code using by Raspberry Pi to control devices
Return true.
switch
)
rcswitchhe.switchOn(Switch a remote switch on
switch
- (Number) switch number
Return true.
switch
)
rcswitchhe.switchOff(Switch a remote switch off
switch
- (Number) switch number
Return true.
Release History
- 0.1.0 Initial release
- 0.1.1 Node cpp correction
- 0.1.2 Change documentation
- 0.1.4 New version using nan
- 0.1.5 Nan bindings
- 0.1.6 Enable transmit
- 0.1.7 SetRemoteCode
- 0.1.8 SetRemoteCode private
- 0.1.9 Remove wiringPiSetup because used by rcswitch