rcswitch-peterstrapp

0.3.0 • Public • Published

node-rcswitch

NPM version

Node bindings for the rcswitch RaspberryPi port.

It should be compatible with Node 0.8, 0.10 and 0.12 (tested only on 0.10 and 0.12). Successfully tested on Raspbian Wheezy up-to-date as of 2015-02-28.

Requirements

  • WiringPi must be installed in order to compile.
  • Both the data and the power Pins of the 315/433Mhz receiver/emitter must be connected to the RPi. Note the number of the WiringPi data Pin. (see http://wiringpi.com/pins/)
  • The user must have permission to access the Raspberry Pi GPIO pins. There are two options:
1. Start node with root access (not a good idea and can be unreliable).
2. The better method is to expose the GPIO pins in `/sys/class/gpio` using the [gpio tool](https://projects.drogon.net/raspberry-pi/wiringpi/the-gpio-utility/) that comes with WiringPi. Example:
```
gpio export 27 out
```
And give the user permission to access the GPIO pins:
```
chgrp -R dialout /sys/class/gpio
chmod -R g+rw /sys/class/gpio
```
The above 3 lines can be added to `/etc/rc.local` to allow the GPIO pins to be exposed on start-up.

Usage

var rcswitch = require('rcswitch'); // Might throw an error if wiring pi init failed, or exit process if no root (must work on that)
 
rcswitch.enableTransmit(0); // Use data Pin 0
rcswitch.switchOn("10110", 1); // Switch on the first unit of 10110 (code 1x23x) group
rcswitch.switchOff("11000", 2); // Switch off the second unit of 11000 (code 12xxx) group
var rcswitch = require('rcswitch');
 
var pin = 27;
 
if(rcswitch.enableReceive(pin)) {
  setInterval(function() {
      if (rcswitch.available()) {
          console.log(rcswitch.getReceivedValue());
          rcswitch.resetAvailable();
      }
  }, 1000);
}

API

Configuration

rcswitch.enableTransmit(pin)

Enable transmission on the given pin (make it an OUTPUT). Must be called before any other functions.

Return true if pin is an integer, false otherwise.

rcswitch.disableTransmit()

Disable transmission.

Return true.

rcswitch.enableReceive(pin)

Enable receive on the given pin (make it an INPUT). Must be called before any other functions.

Return true if pin is an integer, false otherwise.

rcswitch.disableReceive()

Disable receive.

Return true.

Receive

rcswitch.available()

Returns true if data has been received and is waiting to be retrieved from the buffer.

rcswitch.resetAvailable()

Resets the data available flag.

Returns true;

rcswitch.getReceivedValue()

Fetches buffered received data.

Returns value as a Uint32.

Transmit - Type A

Type A switch

rcswitch.switchOn(group, switch)

Switch a remote switch on (Type A with 10 pole DIP switches).

  • group - (String) code of the switch group (refers to DIP switches 1, 2, 3, 4 and 5 where "1" = on and "0" = off - e.g. if all DIP switches are on it's "11111")
  • switch - (Number) switch number (can be 1 (if DIP switch A is on), 2 (if DIP switch B is on) and so on until 4)

Return true.

rcswitch.switchOff(group, switch)

Switch a remote switch off (Type A with 10 pole DIP switches).

  • group - (String) code of the switch group (refers to DIP switches 1, 2, 3, 4 and 5 where "1" = on and "0" = off - e.g. if all DIP switches are on it's "11111")
  • switch - (Number) switch number (can be 1 (if DIP switch A is on), 2 (if DIP switch B is on) and so on until 4)

Return true.

Transmit - Type B

Type B switch

rcswitch.switchOn(group, switch)

Switch a remote switch on (Type B with two rotary/sliding switches).

  • group - (Number) group (can be 1, 2, 3, 4)
  • switch - (Number) switch (can be 1, 2, 3, 4)

Return true.

rcswitch.switchOff(group, switch)

Switch a remote switch off (Type B with two rotary/sliding switches).

  • group - (Number) group (can be 1, 2, 3, 4)
  • switch - (Number) switch (can be 1, 2, 3, 4)

Return true.

Transmit - Type C

rcswitch.switchOn(family, group, switch)

Switch a remote switch on (Type C Intertechno).

  • family - (String) familycode (can be a, b, c, d, e, f)
  • group - (Number) group (can be 1, 2, 3, 4)
  • switch - (Number) switch (can be 1, 2, 3, 4)

Return true.

rcswitch.switchOff(family, group, switch)

Switch a remote switch off (Type C Intertechno).

  • family - (String) familycode (can be a, b, c, d, e, f)
  • group - (Number) group (can be 1, 2, 3, 4)
  • switch - (Number) switch (can be 1, 2, 3, 4)

Return true.

Other

rcswitch.send(codeWord)

Send raw codeword.

  • codeword - (String) codeword

Return true.

Package Sidebar

Install

npm i rcswitch-peterstrapp

Weekly Downloads

1

Version

0.3.0

License

GPL-2.0

Last publish

Collaborators

  • peterstrapp