var Tinkerforge = require('tinkerforge');

var IPConnection = Tinkerforge.IPConnection;
var BrickletDualButton = Tinkerforge.BrickletDualButton;

IPConnection = new IPConnection();
BrickletDualButton = new BrickletDualButton();

var Tinkerforge = require('tinkerforge');

var HOST = 'localhost';
var PORT = 4223;

// Create connection and connect to brickd
ipcon = new Tinkerforge.IPConnection();
ipcon.connect(HOST, PORT);

ipcon.on(Tinkerforge.IPConnection.CALLBACK_CONNECTED,
    function(connectReason) {
        // Trigger Enumerate
        ipcon.enumerate();
    }
);

// Register Enumerate Callback
ipcon.on(Tinkerforge.IPConnection.CALLBACK_ENUMERATE,
    // Print incoming enumeration
    function(uid, connectedUid, position, hardwareVersion, firmwareVersion,
             deviceIdentifier, enumerationType) {
        console.log('UID:               '+uid);
        console.log('Enumeration Type:  '+enumerationType);
        if(enumerationType === Tinkerforge.IPConnection.ENUMERATION_TYPE_DISCONNECTED) {
            console.log('');
            return;
        }
        console.log('Connected UID:     '+connectedUid);
        console.log('Position:          '+position);
        console.log('Hardware Version:  '+hardwareVersion);
        console.log('Firmware Version:  '+firmwareVersion);
        console.log('Device Identifier: '+deviceIdentifier);
        console.log('');
    }
);

console.log("Press any key to exit ...");
process.stdin.on('data',
    function(data) {
        ipcon.disconnect();
        process.exit(0);
    }
);

var Tinkerforge = require('tinkerforge');

var HOST = 'localhost';
var PORT = 4223;
var UID = '7bA'; // Change to your UID

var ipcon = new Tinkerforge.IPConnection(); // Create IP connection
var h = new Tinkerforge.BrickletHumidity(UID, ipcon); // Create device object

ipcon.connect(HOST, PORT,
    function(error) {
        console.log('Error: '+error);        
    }
); // Connect to brickd
// Don't use device before ipcon is connected

ipcon.on(Tinkerforge.IPConnection.CALLBACK_CONNECTED,
    function(connectReason) {
        // Get current humidity (unit is %RH/10)
        h.getHumidity(
            function(rh) {
                console.log('Relative Humidity: '+rh/10+' %RH');
            },
            function(error) {
                console.log('Error: '+error);
            }
        );
    }
);

console.log("Press any key to exit ...");
process.stdin.on('data',
    function(data) {
        ipcon.disconnect();
        process.exit(0);
    }
);

var Tinkerforge = require('tinkerforge');

var HOST = 'localhost';
var PORT = 4223;
var UID = '7bA'; // Change to your UID

var ipcon = new Tinkerforge.IPConnection(); // Create IP connection
var h = new Tinkerforge.BrickletHumidity(UID, ipcon); // Create device object

ipcon.connect(HOST, PORT,
    function(error) {
        console.log('Error: '+error);        
    }
); // Connect to brickd
// Don't use device before ipcon is connected

ipcon.on(Tinkerforge.IPConnection.CALLBACK_CONNECTED,
    function(connectReason) {
        // Set threshold callbacks with a debounce time of 10 seconds (10000ms)
        h.setDebouncePeriod(10000);
        // Configure threshold for "outside of 30 to 60 %RH" (unit is %RH/10)
        h.setHumidityCallbackThreshold('o', 30*10, 60*10);    
    }
);

// Register threshold reached callback
h.on(Tinkerforge.BrickletHumidity.CALLBACK_HUMIDITY_REACHED,
    // Callback for humidity outside of 30 to 60 %RH
    function(humidity) {
        if(humidity < 30*10) {
            console.log('Humidity too low: '+humidity/10+' %RH');
        }
        if(humidity > 60*10) {
            console.log('Humidity too high: '+humidity/10+' %RH');
        }
    }
);

console.log("Press any key to exit ...");
process.stdin.on('data',
    function(data) {
        ipcon.disconnect();
        process.exit(0);
    }
);