tpark


  • This driver module enables a Parrot AR Drone to be connected to Nitrogen and implements both the cameraManager and droneManager interfaces.

    published 0.1.2 11 years ago
  • A subclass of CameraManager that uses OpenCV to implement motion detection.

    published 0.1.0 11 years ago
  • Talk to your Raspberry PI's general purpose inputs and outputs

    published 0.2.5 10 years ago
  • published 0.1.17 10 years ago
  • This module allows you to use a GPIO pin in Nitrogen as a device.

    published 0.1.3 10 years ago
  • Public key authentication strategy for Passport.

    published 1.0.4 7 years ago
  • Watches a Twitter stream for hashtags and adjusts a light from hot (red) to blue (cool) depending on the difference between the near term frequency of this term versus its long term frequency. One of my favorite demos of a Nitrogen application.

    published 0.1.15 10 years ago
  • This module provides support for the BMP085 (discontinued but still in circulation) and BMP180 (its pin compatible replacement) temperature and pressure sensor chips.

    published 0.1.7 10 years ago
  • published 0.1.0 10 years ago
  • Node.js Interface for DHT22 on Raspberry

    published 0.0.2 10 years ago
  • This module allows you to use the Linux package fswebcam as a Nitrogen camera device.

    published 0.2.0 10 years ago
  • This module allows you to use the Linux package fswebcam as a Nitrogen camera device.

    published 0.2.0 10 years ago
  • This module provides support for the [AirPi](http://airpi.es/) air quality and weather surveillance station.

    published 0.2.0 10 years ago
  • This driver module enables Foscam cameras to be connected to Nitrogen. It has been tested with a model FI8904W but should work with modern Foscam outdoor wireless IP cameras.

    published 0.2.0 10 years ago
  • This module allows you to use a GPIO pin in Nitrogen as a device.

    published 0.2.0 10 years ago
  • This module allows you to use the Mac command line utility imagesnap as a Nitrogen camera device.

    published 0.2.0 10 years ago
  • published 0.2.0 10 years ago
  • published 0.2.0 10 years ago
  • This module allows you to use the Philips Hue light as a Nitrogen device via a Philips Hue bridge.

    published 0.2.0 10 years ago
  • This module allows you to use the Raspberry PI camera as a Nitrogen device.

    published 0.2.0 10 years ago
  • Nitrogen application that automatically takes photos around sunset given a location and a camera id.

    published 0.2.0 10 years ago
  • Nitrogen application that automatically takes photos around sunset given a location and a camera id.

    published 0.2.0 10 years ago
  • Provides a device application for the AirPi (http://airpi.es) on Nitrogen on a Raspberry Pi.

    published 0.2.0 10 years ago
  • published 0.2.0 10 years ago
  • This Nitrogen application finds the Philip Hue bridge(s) on the local network, connects to them, and connects all of the attached lights on that hub to Nitrogen.

    published 0.2.0 10 years ago
show more packages